Brother MFC-820CW - Manual (Page 78)

Chapter 8
62
Retrieving fax messages
8
You can call your machine from any touch
tone phone and have your fax messages sent
to a machine.
a
Dial your fax number.
b
When your machine answers, enter
your remote access code (3 digits
followed by l) at once. If you hear one
long beep, you have messages.
c
When you hear two short beeps, press 9
6 2.
d
Wait for the long beep, enter the number
of the remote fax machine you want your
fax messages sent to using the dial pad,
then enter # # (up to 20 digits).
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e
Press 9 0 to reset the machine when
you’ve finished.
f
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Changing your Fax
Forwarding number
8
You can change the default setting of your fax
forwarding number from another touch tone
telephone or fax machine.
a
Dial your fax number.
b
When your machine answers, enter
your remote access code (3 digits
followed by l) at once. If you hear one
long beep, you have messages.
c
When you hear two short beeps, press 9
5 4.
d
Wait for the long beep, enter the new
number of the remote fax machine you
want your fax messages forwarded to
using the dial pad, then enter # # (up to
20 digits).
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e
Press 9 0 to reset the machine when you
have finished.
f
Hang up after you hear your machine
beep.