Brother MFC-820CW - Manual (Page 97)

Walk-Up PhotoCapture Center™
81
12
Changing print settings
12
You can change the print settings temporarily for the next printing.
These settings are temporary, and the machine returns to its default settings 180 seconds after
printing, unless you have set the Mode Timer to 2 minutes or less. (See Setting the Mode Timer
on page 21.)
Note
You can save the print settings you use most often by setting them as default. (See Setting
your changes as new default on page 84.)
1 No of prints
(For View Photo(s))
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos)
You can see the number of copies of each photo that will be printed.
Menu Selections Options Page
Print Quality Normal/Photo* 82
Paper & Size Letter Glossy*/ 4"x 6" Glossy/ 5"x 7" Glossy/ A4 Glossy/
Letter Plain/ A4 Plain/ Letter Inkjet/ A4 Inkjet/
4"x 6" Inkjet 82
Brightness 82
Contrast 82
True2Life On/Off*
White Balance / Sharpness /
Color Density
82
Cropping On*/Off 83
Borderless On*/Off 83
Set New Default Yes/No 84
Factory Reset Yes/No 84
PHOTO
Print Quality
Paper & Size
Brightness
Contrast
True2Life
Photo
Letter Glossy
0
0
Off
Print Start Press
0001 1