Brother MFC-820CW - Manual (Page 42)

26
4
Entering Fax mode
4
When the machine is idle the date and time
appear on the LCD. When you want to send
a fax, or change fax send or receive settings,
press the (Fax) key to illuminate it in
green.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
„ Fax Resolution (See page 29.)
„ Contrast (See page 29.)
„ Speed-Dial (See page 48.)
„ Outgoing Call (See page 49.)
„ Caller ID hist. (See page 50.)
„ Broadcasting (See page 28.)
„ Delayed Fax (See page 31.)
„ Batch TX (See page 31.)
„ Real Time TX (See page 30.)
„ Polled TX (See page 66.)
„ Polling RX (See page 65.)
„ Overseas Mode (See page 31.)
„ Scan Size (See page 27.)
„ Set New Default (See page 31.)
„ Factory Reset (See page 32.)
When the option you want is highlighted,
press OK.
Faxing from the ADF
4
a
Press (Fax).
b
Put the document face down in the ADF.
c
Enter the fax number using the dial pad,
Speed-Dial or Search.
d
Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If the memory is full, the fax will be sent in
real time.
Sending a fax
4
09012345689
FAX
Fax Start Press
Fax Resolution Standard
Contrast Auto
Speed-Dial
Outgoing Call