Brother MFC-6800 - Manual (Page 182)

20 - 3 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
ERROR MESSAGE CAUSE ACTION
OUT OF MEMORY
(May occur when the
MFC is used as a
printer.)
Machine memory
capacity has been
exceeded. Turn off the power, and
then turn it back on. Data
remaining in the memory of
the MFC will be deleted.
• If you have installed the
Windows ® driver, try
again after setting the
True Type mode to
“Print as Graphics” in
the PRINT menu of
your application
software.
• Reduce the print
resolution or reduce the
complexity of your
document.
NO RESPONSE/
BUSY The number you called
does not answer or is
busy. Or, you may have
reached a number that is
not connected to a fax
machine. Check the number and
try again.
NOT REGISTERED You tried to access a
Speed Dial number that
is not programmed. Set up the Speed Dial
number. See pages 7-1 to
7-2.
PLS OPEN COVER A page, piece of paper or
paper clip, etc. may be
jammed inside the
MFC. Open the top cover. If you
see any jammed paper or
other item, gently pull it
out, then close the top
cover. If the error message
remains, open and close
the top cover again. If the
MFC cannot reset itself
and return to the date and
time prompt, it will
display
MACHINE
ERROR XX . Please call
Brother Customer Service
and tell them the Machine
Error number at:
In USA:
1-800-284-4329
In Canada:
1-877-BROTHER
In Montreal:
1-514-685-6464