Brother MFC-6800 - Manual (Page 56)

5 - 3 S E T U P R E C E I V E
Easy Receive
When you use this feature, you don’t have to press Fax Start when you answer
a fax call. Selecting
ON allows the MFC to receive fax calls automatically, even
if you lift the handset of an extension or external phone. When you see
RECEIVING on the LCD or when you hear “chirps” through the handset of an
extension phone connected to another wall jack, just replace the handset, and
your MFC does the rest. Selecting
OFF means you’ll have to activate the MFC
yourself, by lifting the handset of an external or extension phone, then pressing
Fax Start on the MFC—OR—by pressing 5 1 if you are not at your MFC.
(See
Operation from Extension Telephone , page 5-4.)
1
Press Menu/Set, 2, 1, 2.
2
Use to select ON or OFF ,
and then press Menu/Set.
3
Press Stop/Exit.
Printing a Reduced Incoming Fax
If you turn on Auto Reduction, the MFC will choose the appropriate reduction
percentage for the type of paper you loaded.
1
Press Menu/Set, 2, 1, 4.
2
Use to select ON (or OFF ),
and then press Menu/Set.
3
Press Stop/Exit.
Note
If Easy Receive is OFF and an original is in the ADF, lift the handset of an
external or extension phone, press Fax Start, then 2 to activate the MFC.
Note
If you’ve set the feature to ON , but your MFC doesn’t automatically connect a
fax call when you lift an external or extension phone handset, press the Fax
Receive code 5 1.
Note
If you send faxes from a computer on the same phone line and the MFC
intercepts them, set Easy Receive to
OFF .
2.EASY RECEIVE
or
4.AUTO REDUCTION
or