Brother MFC-6800 - Manual (Page 87)

P R I N T I N G R E P O R T S 10 - 2
Setting the Fax Activity Report Interval
You can set the machine to print activity reports at specific intervals (6, 12, 24
hours, 2, 4, or 7 days). If you set the interval to
OFF , you can print the report by
following the Steps in the next page.
1
Press Menu/Set, 2, 4, 2.
2
Press to choose an interval,
and then press Menu/Set.
(If you choose 7 days, the LCD prompts you to choose a day at which to begin
the 7-day countdown.)
3
Enter the time to begin printing, in 24-hour format, and then press Menu/Set.
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.
Using the Reports Key
Five reports are available:
Prints the Menu Table so you can see
at-a-glance how to quickly program every
menu selection.
Lists names and numbers stored in Speed Dial
memory, in numerical order.
Lists information about the last 200 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission.
Lists settings for GENERAL SETUP ,
SETUP RECEIVE , SETUP SEND , PRINT
REPORTS , and TEL SERVICE . The settings
for REMOTE FAX OPT are included.
2.ACT. INTERVAL
INTERVAL OFF
SELECT & SET
or
1.HELP LIST
2.AUTO DIAL
3.FAX ACTIVITY
4.TRANSMISSION
5.USER SETTINGS