Brother MFC-6800 - Manual (Page 33)

A S S E M B L Y A N D C O N N E C T I O N S 2 - 5
Setting Up the MFC
Follow the instructions below to connect the power cord, and telephone line.
1
Connect the power cord.
2
Turn the MFC power switch ON.
WARNING
■
This MFC must be grounded using a three-prong plug.
■
Since the MFC is grounded through the power outlet, you can protect yourself
from potentially hazardous electrical conditions on the telephone network by
keeping the power to your MFC on when you connect it to a telephone line.
Similarly, you can protect yourself when you want to move your MFC, by
disconnecting the telephone line first, and then the power cord.
■
Lightning and power surges can damage this product! We recommend that you
use a quality surge protection device on the AC power line as well as on the
telephone line, or unplug the lines during a lightning storm.
■
Do not touch the rollers at the paper exit.
3
Connect the telephone line.
Connect one end of the telephone line cord to the jack labeled LINE on the left
side of the MFC. Connect the other end to a modular wall jack.