Setting the ring volume, Setting the beeper volume, Setting the speaker volume – Brother MFC-6800 User Manual
Page 52: Memory storage, Setting the ring volume 1
4 - 4
I N I T I A L S E T U P
Setting the Ring Volume
1
Press Menu/Set, 1, 4, 1.
2
Press
to select (
OFF
,
LOW
,
MED
or
HIGH
), and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your MFC is idle. You can turn the ring
OFF
or you can select a ring volume level.
Press
to adjust the volume level. With each key press, the MFC rings so
you can hear the active setting as the LCD shows it.
Each key press changes the volume. The new setting will remain until you
change it again.
Setting the Beeper Volume
You can set the beeper to
LOW
,
HIGH
or
OFF
. The default setting is
LOW
.
When the beeper is set to
LOW
or
HIGH
, the MFC beeps every time you press
a key or make an error and when fax sending or receiving has finished.
1
Press Menu/Set, 1, 4, 2.
2
Press
to select your option.
3
When the LCD shows the option you want, press Menu/Set.
4
Press Stop/Exit.
Setting the Speaker Volume
You can turn off the volume of the MFC one-way speaker.
1
Press Menu/Set, 1, 4, 3.
2
Press
to select
ON
(or
OFF
), and then press Menu/Set.
3
Press Stop/Exit.
Memory Storage
In the event of a power failure, all settings in the
GENERAL SETUP
,
SETUP
RECEIVE
,
SET AUTO DIAL
,
REMOTE FAX OPT
, plus the
COVERPG
SETUP
and
COVERPAGE MSG
functions (from
SETUP SEND
) are stored
permanently. You may have to reset the date and time.
1.RING
or
or
2.BEEPER
or
or