Brother MFC-6800 - Manual (Page 68)

6 - 9 S E T U P S E N D
Cover Page for Next Fax Only
Make sure the Station ID is set up (see page 4-2). This feature does not work
without the Station ID.
You can set the fax to send a cover page with a particular document. This cover
page will include the number of pages in your document.
1
Place the original face up in the ADF, or on the scanner glass.
2
Press Menu/Set, 2, 2, 8.
3
When LCD shows NEXT FAX ONLY? ,
press Menu/Set.
4
Press to select ON (or OFF ), and then press Menu/Set.
5
Press to select one of the standard or custom comments, and then press
Menu/Set.
6
Enter two digits to indicate the number of pages you are sending, and then press
Menu/Set. (For example, press 0, 2 for 2.)
(Enter 0 0 to leave the number of pages blank. If you make a mistake, press
to back up and reenter the number of pages.)
7
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and then go
to Step 8.
8
Enter the fax number you’re calling.
9
Press Fax Start.
Always Send Cover Page
Make sure the Station ID is set up (see page 4-2). This feature does not work
without the Station ID.
You can set the MFC to send a cover page whenever you send a fax. The number
of pages in your fax is not included when you use this setting.
1
Press Menu/Set, 2, 2, 8.
2
Press to select
COVERPAGE:ON? , and then press Menu/Set.
3
If you selected ON, press to select one of the standard or custom comments,
and then press Menu/Set.
4
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 to exit if you are finished choosing settings.
8.COVERPG SETUP
or
or
8.COVERPG SETUP
or
or