Brother MFC-6800 - Manual (Page 81)

R E M O T E F A X O P T I O N S 9 - 1
9
9
Remote Fax Options
Fax Forwarding/Paging
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your MFC stores the received fax in
memory, then dials the fax number you’ve programmed and forwards the fax
message.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
FAX FORWARD? , and then press
Menu/Set.
3
The LCD prompts you to enter the
number of the fax machine where faxes
will be forwarded. Enter the forwarding
number (up to 20 digits), and then press Menu/Set.
4
Press Stop/Exit.
Programming Paging Number
When Paging is selected, your MFC dials the pager number you’ve programmed,
and then dials your Personal Identification Number (PIN); this activates your
pager so you know you have a fax message in the memory.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
PAGING? , and then press Menu/Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Menu/Set. Do not include the area code
if it is the same as that of your MFC.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to
OFF .
1.FAX FWD/PAGING
or
ENTER & SET KEY
FWD#:
1.FAX FWD/PAGING
or
ENTER & SET KEY
PAG#: