Brother MFC-6800 - Manual (Page 49)

I N I T I A L S E T U P 4 - 1
4
4
Initial Setup
Getting Started
Setting Paper Size
You can use three sizes of paper for printing your faxes and copies — letter,
legal and A4. When you change the kind of paper you have loaded in the MFC,
you will need to change the setting for paper size so your MFC can fit the
incoming fax on the page.
1
Press Menu/Set, 1,1.
2
Press to select LETTER , LEGAL
or A4 , and then press Menu/Set.
3
Press Stop/Exit.
Setting Date and Time
Your MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press Menu/Set, 1, 2.
2
Enter the last two digits of the year,
and then press Menu/Set.
3
Enter two digits for the month (for
example, enter 09 for September, or 10
for October), and then press Menu/Set.
4
Enter two digits for the day (for example,
06), and then press Menu/Set.
5
Enter the time in 24-hour format (for
example, enter 15:25 for 3:25 PM), and
then press Menu/Set.
6
Press Stop/Exit.
The LCD now shows the date and time you set whenever the MFC is in Standby
mode.
1.PAPER SIZE
or
2.DATE/TIME
YEAR:XX
ENTER & SET KEY
MONTH:XX
ENTER & SET KEY
DAY:XX
ENTER & SET KEY
TIME:XX:XX
ENTER & SET KEY