Canon TX-20 Full Auto Tonometer - Manual (Page 21)

3NamesofParts
21
Bottom Side
4
1
2
3
1 RS-232C connector
Transfers measurement data to an external device.
Can be connected to a device that supports the
RS-232C standard.
2 USB connector
Reads patient ID from an external device.
3 AC power connector
4 LAN connector
Transfers measurement data to an external device.
UsingtheRS-232CorLANconnector
See “Safety Precautions” (see page 12) and “Settings for Interface of Output of Measurements” (see
page 64).
L-IE-5191C_TX-20.indb 21 2013/07/18 13:10:18