Canon TX-20 Full Auto Tonometer - Manual (Page 85)

7Troubleshooting
85
Warning
Code Cause Remedy
260 Confirmation for executing reset of patient No.
1) Select [OK] to reset.
If you do not want to reset the study results, select
[CANCEL].
261
Appears if the format of the text input for the computer
name is incorrect.
1) Input it again in the correct format (see page 65). 262
Appears if the format of the text input for the user name is
incorrect.
264
Appears if the format of the text input for the path to the
folder to store data is incorrect.
265
Confirm whether to save settings when changing the LAN
settings and then doing a LAN connection test.
1) Select [OK] to save the settings.
2) Select [CANCEL] to not save the settings and not do the
connection test.
269
Operation stopped because a button was operated during
LAN transmission.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Do the operation again.
271
Abnormality occurred in LAN transmission.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Do the transmission again.
272
273
280
281
282
283
284
285
Abnormality occurred in LAN transmission. The user name
is not correct.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Check that the [User] in the LAN menu is set correctly (see
page 65).
286
Abnormality occurred in LAN transmission. The password
is not correct.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Check that the [Password] in the LAN menu is set correctly
(see page 65).
297
Abnormality occurred in LAN transmission. The file you are
trying to send already exists.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) If a file in the folder already exists with the same name,
change the name of one of the files. Or, use a different
folder.
3) Do the transmission again.
298 Abnormality occurred in LAN transmission.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Do the transmission again.
299
Abnormality occurred in LAN transmission. The output
folder does not exist.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Check that the [Output Folder] in the LAN menu is set
correctly (see page 65). Or, check that a folder exists where
you are outputting the data.
L-IE-5191C_TX-20.indb 85 2013/07/18 13:10:41