Canon imagePROGRAF iPF6450 - Manual (Page 1022)

Cannot calibrate. Cannot calibrate.
Cause Corrective Action
The paper for printing a test pattern is soiled. Otherwise,
you have loaded colored paper. Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide.)
The test pattern was printed too faintly. Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
→P.987
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction. Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Excessive temperature or humidity. Excessive temperature or humidity.
Cause Corrective Action
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation. Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended envi-
ronmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide.)
Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibra-
tion. However, note that correct adjustment may not be possible.
Please execute common calibration. Please execute common calibration.
Cause Corrective Action
There is not even one Common calibration execution result.
Note that this is displayed when all of the following are satisfied.
•
If Set Exec. Guide is On in the Control Panel menu.
• If the printer is loaded with a type of paper on which color calibration cannot be executed.
Execute Common calibration.
(See "Color Calibration Using the Printer Sen-
sor.")
→P.826
Set Set Exec. Guide to Off on the Control Panel
menu.
(See "Menu Structure.")
→P.657
Please commn calibrt using above paper. Please commn calibrt using above paper.
Cause Corrective Action
It is now recommended that you execute Common calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is
true.
• If the printer is loaded with a type of paper on which color calibration cannot be executed and the predefined condi-
tions since executing the Common calibration the last time have been reached.
• Although a media type that color calibration can be executed on is loaded in the printer, there is no record or per-
forming color calibration on that media, and the designated criteria from executing Common calibration the last
time have been reached.
Execute Common cali-
bration.
(See "Color Calibra-
tion Using the Printer
Sensor.")
→P.826
Set Set Exec. Guide
to Off on the Control
Panel menu.
(See "Menu Struc-
ture.")
→P.657
Please calibrate using above paper. Please calibrate using above paper.
Cause Corrective Action
It is now recommended that you execute Unique calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is
true. Execute Unique calibra-
tion.
(See "Color Calibration
Using the Printer Sen-
sor.")
→P.826
Cannot calibrate. iPF6450
User's Guide
Error Message
Messages regarding printing or adjustment
1022