Installation procedure – Canon imagePROGRAF iPF6450 User Manual
Page 847
Note
•
In order to execute color calibration on paper other than genuine Canon paper/feed certified paper, a calibration target is re-
quired for that paper. Calibration targets can be created on a printer with a spectrophotometer unit installed by using the Me-
dia Configuration Tool that is included with printers that support the spectrophotometer unit.
For details on creating a calibration target, refer to the following topics.
•
Acquiring Color Measurement Data from the Color Chart
You can measure the colors of any arbitrary color chart and save the color measurement data on your computer. You
can then create an ICC profile by importing this data into commercially available ICC profile creation software.
For the procedure for acquiring color measurement data, see "Acquiring Color Measurement Data For Any Color Chart."
Note
•
This function can be executed when a printer that has a spectrophotometer unit installed is selected.
Execute Color Check
You can execute a color check.
When a color check is executed, a built-in pattern is printed, the color difference from a calibration target registered in
the printer is calculated, and the check results are displayed.
Execute a color check when you want to check the color status of a printer in detail.
For the procedure for executing color check, see "Executing Color Check."
Note
•
This function can be executed when a printer that has a spectrophotometer unit installed is selected.
Installation Procedure
Installation Procedure
The installation procedure for the Color Calibration Management Console is as follows.
1
Place the User Software CD-ROM in the CD-ROM drive and start the installer.
Note
•
If the installer screen does not appear automatically, open the CD-ROM from My Computer and click setup.exe to
open the icon.
2
Click the Install Individual Software button.
iPF6450
Installation Procedure (Windows)
Color Management
Color Calibration Management Console (Windows)
847