Canon imagePROGRAF iPF6450 - Manual (Page 1036)

Minimum paper length Sheets (When the Spectrophotometer Unit is
mounted) 420 mm (16.5 in)
Maximum printable
length (*1) Rolls 18 m (19.7 yd)
Sheets Top Paper Feed Slot 1,600 mm (63.0 in)
Front Paper Feed Slot 914 mm (36.0 in)
Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)
Sheets Top Paper Feed Slot 0.07–0.8 mm (0.0028–0.031 in)
Front Paper Feed Slot 0.5–1.5 mm (0.020–0.059 in)
Roll maximum outer diameter 150 mm (6 in) or shorter
Supported paper core inner diameter 2 inches / 3 inches
Print area For details, see "Print Area." →P.1036
*1: Varies depending on the operating system or application.
Print Area Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless
printing, the actual printing area corresponds to the paper size minus the space for this margin.
Printable Area Recommended Print Area
Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides
Sheets Top Paper
Feed Slot
3 mm (0.12 in) 3 or 23 mm (0.12 or
0.91 in) 3 mm (0.12 in) 20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in)
Front Paper
Feed Slot 3 mm (0.12 in) 23 mm (0.91 in) 3 mm (0.12 in)
Rolls 0 or 3 mm (0 or
0.12 in) 0 or 3 mm (0 or 0.12
in) 0 or 3 mm (0 or
0.12 in) 20 mm (0.79 in) 5 mm (0.20 in) 5 mm (0.20 in)
Sheets
• Printable Area
Printing from the Top Paper Feed Slot requires a margin of 3 mm (0.12 in) on top, 3 mm (0.12 in) or 23 mm (0.91
in) on bottom, and 3 mm (0.12 in) on the left and right sides. Some types of paper require a bottom margin of 23
mm (0.91 in). For more information, see the Paper Reference Guide. (See "Types of Paper.")
→P.526
Printing from the Front Paper Feed Slot requires a margin of 3 mm (0.12 in) on top, 23 mm (0.91 in) on bottom,
and 3 mm (0.12 in) on the left and right sides.
• Recommended Print Area
A margin of 20 mm (0.79 in) on top, 23 mm (0.91 in) on bottom, and 5 mm (0.20 in) on left and right sides is re-
quired.
Print Area iPF6450
User's Guide
Specifications
Printer Specifications
1036