Canon imagePROGRAF iPF6450 - Manual (Page 372)

• A Paper Source
Shows the Paper Source supported by the printer, as well as the type of paper loaded. To update the media type
setting in the printer driver, select the desired Paper Source option and click OK.
Paper Detailed Settings Dialog Box Paper Detailed Settings Dialog Box
The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printer
driver help.
Note
• To display the Paper Detailed Settings dialog box, on the Main pane, click Set by Media Type.(See "Main Pane →P.368 ")
A Media Type
The paper selected with Media Type of the Main panel is displayed.
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Paper Reference
Guide
".)
B Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Between Pages setting is only valid for rolls.
• C Between Pages
You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is required
for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if Cutting
Mode is set to Automatic.
Setting Item Details
Printer Default The setting of the control panel of the printer is applied.
None Paper is ejected immediately after printing completes.
30 sec. / 1 min. / 3 min. / 5 min. / 10
min. / 30 min. / 60 min. Paper is ejected when the set time elapses after printing completes.
• D Between Scans
You can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleeding or
color unevenness such as when bleeding occurs on a page or when color unevenness occurs during borderless
printing.
Paper Detailed Settings Dialog Box (Mac OS X) iPF6450
User's Guide
Mac OS X Software
Printer Driver
372