Canon imagePROGRAF iPF6450 - Manual (Page 546)

2
Select the Main pane and click C Settings in A Media
Type.
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
C Between
Pages and D Between Scans in B Drying Time, and
then click OK.
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
→P.372
Specifying the Cutting Method for Rolls Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit following
printer driver settings. Media
Menu > Pa-
per Details
> (Various
Types of
Paper) >
Cutting
Mode Automatic Auto Cut
(See "Cut-
ting Roll Pa-
per After
Printing.")
→P.170
Yes
Eject Select this to move the cutter by key operation and cut
paper. Although there are cases with Automatic in
which the paper falls and the paper surface is scratch-
ed, you can avoid damaging the paper with this method
since you can cut by holding the paper with your hand
so that the paper does not fall when cutting. Also, since
you can cut while visually confirming the drying of the
ink, you can avoid ejecting paper before the ink has
dried. Eject Yes
Specifying the Cutting Method for Rolls iPF6450
User's Guide
Handling and Use of Paper
Handling rolls
546