Canon imagePROGRAF iPF6450 - Manual (Page 574)

Installation Procedures Installation Procedures
The Media Configuration Tool installation screen appears when you start the installation of a new version of the Media
Configuration Tool. The installation procedure started from this screen is described below.
Important
• If the printer driver is installed from the User Software CD-ROM, the Media Configuration Tool is also installed and the media
information is also configured. Therefore, the following procedure does not normally need to be performed. To install the
Media Configuration Tool without using the User Software CD-ROM, such as when you have downloaded a new version of
the Media Configuration Tool from the Canon website, use the following procedure.
• You must be logged in as Administrator when installing software in Windows.
1
Start the Media Configuration Tool installer.
Click the Next button.
2
The next screen presents selections for the country or
area where the printer is used.
Select a country or territory then click the Next button.
Installation Procedures (Windows) iPF6450
User's Guide
Handling and Use of Paper
Media Configuration Tool (Windows)
574