Canon imagePROGRAF iPF6450 - Manual (Page 440)

Resizing by specifying a scaling value
1
Select an object.
2
Open the Format Dialog Box →P.437 .
3
Use Scaling to set the magnification for enlargement or reduction. You either enter numbers directly.
Note
• You can input between 25 and 400.
• You can change the numbers by clicking either ▲ button or ▼ button.
4
Click the OK button.
Moving an Object Moving an Object
You can move the object position.
1
Select an object.
2
Place the pointer inside the selection box of the object
to show the crosshair handle, and drag it to move the
object.
Rotating an Object Rotating an Object
You can rotate the object.
1
Select an object.
2
Select Rotate Left or Rotate Right from the toolbar.
Alternatively, you may click on the Rotate check box in
the Format Dialog Box
→P.437 then select Rotate
Right or Rotate Left, and click the OK button.
Note
• When several objects are selected, you cannot select Rotate.
Moving an Object (Mac OS X) iPF6450
User's Guide
Mac OS X Software
Free Layout
440