Canon imagePROGRAF iPF6450 - Manual (Page 948)

4
Fold a sheet of Plain Paper two or three times (a) and
insert it under the Paper Retainer (b) from behind the
printer to wipe the entire surface of the Paper Retainer
clean.
5
Attach the Roll Feed Unit. (See "Installing the Roll Feed Unit.") →P.554
6
Plug the power cord into the outlet.
Cleaning the Spectrophotometer Unit (option) Parts Cleaning the Spectrophotometer Unit (option) Parts
Clean the Spectrophotometer Unit parts as follows.
Cleaning the White Calibration Tile
1
Turn the printer off.
(See "Turning the Printer On and Off.")
→P.23
2
Unplug the power cord from the outlet.
Caution
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the print-
er on poses a risk of injury if you touch moving parts inside the printer.
3
Open the Spectrophotometer Unit Cover.
4
Press down on the center (near the blue label) of the
Up-down Unit to lower the Up-down Unit.
Cleaning the Spectrophotometer Unit (option) Parts iPF6450
User's Guide
Maintenance and Consumables
Cleaning the Printer
948