Canon imagePROGRAF iPF6450 - Manual (Page 105)

Important
• When printing without borders, be certain to set the blue switch on the platen to the ● side. If the switch is set incorrectly,
print quality may deteriorate. (See "Setting the Blue Switch on the Platen.")
→P.992
• Borderless printing is not possible if details such as crop marks and margins are included as data on the periphery of the
original.
• If the length of the image to print is short, then since the roll paper is fed out to a prescribed length before cutting in order to
prevent cutting problems and ejection problems, the trailing edge of the roll paper might not be printed borderless.
• If you use an A1 orA2 roll for borderless printing, insert the provided Spacer for Borderless Printing onthe Roll Holder. (See
"Loading Rolls on the Roll Holder.")
→P.533
If you do not attach the Spacer for Borderless Printing,the Platen maybe soiled from borderless printing.
• These features cannot be used in combination with borderless printing: special page layouts, centering originals, and printing
cut lines on rolls.
• If Fit Paper Size or Print Image with Actual Size (Windows only) is selected while performing borderless printing, Rotate
Page 90 degrees (Conserve Paper) cannot be selected. Note that if borderless printing is possible, then even if the original
is rotated 90 degrees, it will be printed by automatically rotating the page by 90 degrees.
Choose the method of borderless printing that suits the original, as desired.
• Scale to fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width.
Note
• You can combine this function with rotating pages 90 degrees before printing so that the original width (relative to portrait
orientation) matches the roll paper width in borderless printing.
For instructions on borderless printing of photos, images, and other documents to match the roll paper width, refer
to the following topics, as appropriate for your computer and operating system.
• Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) →P.105
• Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) →P.108
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following
example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll Hold-
er. (See "Loading Rolls on the Roll Holder.")
→P.533
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
iPF6450 Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
User's Guide
Enhanced Printing Options
Borderless Printing
105