Canon imagePROGRAF iPF6450 - Manual (Page 550)

10
Press the OK button.
After the roll is rewound, it stops automatically.
Paper cutting (to have the roll cut at your specified position)
1
Press the Feed button.
2
Press the ▼ button to advance the roll to the position for cut-
ting.
3
Press the Cut button.
4
Press ▲ or ▼ to select Yes, and then press the OK button.
After the roll paper is cut, it is rewound automatically.
Specifying the Cutting Method for Rolls iPF6450
User's Guide
Handling and Use of Paper
Handling rolls
550