English français español – Americana Appliances CDR-850 User Manual

Page 119

Advertising
background image

119

<PRE1282>

Fr/Sp

Cause

The power cord is unplugged from the power
outlet.

The power was turned off from the component
(stereo amplifier, audio timer, etc.) to which it is
connected.

Signal connections are incorrect.

Signal connections are incorrect.

The CD-R or CD-RW disc in use has been finalized.

The input selection is incorrect.

The REC LEVEL control is set too low.

Signal connections are incorrect.

There is interference from a TV set.

The recording level is set too high.

The disc is damaged or warped.

The disc is extremely dirty.

The remote control batteries are exhausted.

Remote control of the main unit has been
disabled in the MENU.

The remote control unit is operated outside the
remote controllable range.

The SKIP PLAY button is set to ON.

The SKIP PLAY button is set to OFF.

÷ The disc has not been finalized after

recording.

÷ When such a disc is loaded in the unit, the

CD-R indicator lights up (page 40).

Symptom

Power cannot be turned on.

Playback is impossible.

Recording is impossible.

Recorded sound is distorted.

Remote control operation is
impossible.

Certain tracks are skipped
without being played.

Skip playback does not occur.

A recorded CD-R disc cannot
be played on other CD
players.

Remedy

Plug the power cord into a power outlet.

Turn on the component into which the power
cord is connected.

Connect properly as indicated in
“CONNECTIONS WITH OTHER
EQUIPMENT” (pages 24 to 32).

Connect properly as indicated in
“CONNECTIONS WITH OTHER
EQUIPMENT” (pages 24 to 32).

Use a non-finalized disc. Erase a CD-RW disc.

Select the input connected to the desired
source.

Increase the recording level to an optimum
level (page 68).

Connect properly as indicated in
“CONNECTIONS WITH OTHER
EQUIPMENT” (pages 24 to 32).

Turn the TV power off or move this unit away
from the TV.

Lower the recording level (page 68).

Use another disc.

Clean the disc (page 22).

Replace both of the remote control batteries
with new ones.

In the MENU, set the remote control ON (page
38).

Operate in the remote controllable range.

Set the SKIP PLAY button to OFF (page 104).

Set the SKIP PLAY button to ON (page 104).

Finalize the disc (page 86).

En

English

Français

Español

Advertising