Americana Appliances CDR-850 - Manual (Page 30)

30
<PRE1282>
En
A
C
B
Turn and remove
Tournez et retirez
Gire y quite
Cap
Capuchon
Tapa
Pull out.
Tirez.
Saque.
Cap
Capuchon
Tapa
CONNECTION WITH OTHER EQUIPMENT
7 Caution in the use of fibre optic cables.
÷ Do not bend an optical cable at too sharp an angle
(minimum radius 7.5 cm [3 inches]). Be especially careful
when mounting the unit in a rack if the optical cables are
already connected. When an optical cable is stored in the
form of a loop, the loop should have a diameter larger than
15 cm [6 inches].
÷ An optical cable must be inserted completely into the
socket, loss of signal could occur with the cable not fully
inserted.
÷ Use optical cables with a length of no more than 3 meters
[10 feet].
÷ Be careful not to leave dust on or scratch the ends of
optical cables. If the plugs are dirty wipe gently with soft
lint free cloth before connection.
÷ When the optical sockets on the unit are not being used
protect the sockets with the supplied dust caps.
A Digital input/output coaxial socket caps.
÷ Remove the black dust cap before using the coaxial
digital sockets.
÷ Be sure to replace the dust cap when not using the
coaxial sockets.
B Optical sockets are delicate !
÷ Remove the dust caps from the optical sockets before
use, and be sure to replace the caps when the sockets
are not being used.
÷ Retain the dust caps when the optical sockets are in
use.
C Connection of the power cord.
÷ Connect the correct end of the supplied power cord to
the unit and the other end to a suitable AC outlet.
÷ Make sure that both connectors are fully inserted.
Wall outlet
Prise murale
Toma de corriente
Power plug
Fiche d’alimentation
Clavija de alimentación
Figure is for U.S.A. model.
La figure illustre le modèle de l’appareil conçu pour les Etats-Unis.
La figura pertenece al modelo de los EE.UU.