HP XP External Storage Software - Manual (Page 102)

Closes the Select LDEV window, and returns to the Auto Map Setting window. On the Auto Map
Setting window, the CU:LDEV number you selected on the Select LDEV window as the head
CU:LDEV number of the mapped destination internal LDEVs appears in Start CU:LDEV.
• Cancel button
Cancels all settings in the Select LDEV window, and returns to the Auto Map Setting window.
To map multiple external LUs as internal LDEVs at one time:
1. Select the LU Operation tab. The LU Operation pane appears.
2. In the Device tree, select Discovery. WWNs identifying the external array port that can be
connected appear in the tree.
3. In the Device tree, select the port (WWN) you want to connect from the WWNs displayed.
External LUs that can be connected from the port (WWN) selected in the tree appear in the Device
list.
4. In the Device list, select the external LUs you want to map as internal LDEVs, right-click, and select
Add LU (Auto). The Auto Map Setting window (
Figure 48 ) appears.
5. Set the attributes for the external LUs you selected on the Device list.
NOTE:
Attributes for all LUs mapped at one time are identical.
• To select the first CU:LDEV number of the mapped destination internal LDEVs and the mapping
interval, go to step 6.
• To let External Storage XP select the first CU:LDEV number, go to step 9.
6. Click Select LDEV. The Select LDEV window appears.
7. Select the first CU:LDEV number of the mapped destination internal LDEVs and the mapping
interval.
8. Click OK. The Auto Map Setting window appears.
9. If you do not want to automatically set the primary and alternate paths, but you want to specify
the paths to be set as candidates for the primary and alternate paths, click Select Paths. The
Select Paths window appears.
To automatically set alternate paths, go to step 12.
10. Select the path and exclude it from the list of the candidates for the primary and alternate paths.
For instructions, see
Mapping external LUs individually (Add LU) .
11. Click OK. The Auto Map Setting window appears.
12. Click OK. The Auto Map Setting window closes, and mapping the internal CU:LDEV numbers to
the external LUs starts.
NOTE:
If the CU:LDEV numbers cannot be mapped properly because too many external LUs are
selected on the
Device list, all processing is canceled and the message pane appears.
• After the CU:LDEV number mapping is complete, if the SSID setting is required, the SSID
window ( Figure 46 ) appears. Go to step 13.
Configuring external LUs 102