HP XP External Storage Software - Manual (Page 147)

• You do not need a license for External Storage XP or Flex Copy XP to map command devices as
remote command devices.
• Remote command devices are displayed on External Storage XP's panes.
As you select an external LU group number in the Device tree on the LU Operation pane, the
information shown in
Table 10 appears.
Table 10 Information displayed in the Device column for remote command devices
Information displayed in Device
column of Device list Storage array
Format: “Emulation Type” + “-CM” XP12000 Disk Array
Example: OPEN-V-CM, OPEN-3-CM XP10000 Disk Array
HP 200 Storage Virtualization
System
XP1024/XP128 Disk Array
TagmaStore™ Universal Storage
Platform subsystem
TagmaStore™ Network Storage
Controller subsystem
Lightning 9900V series subsystem
SANRISE Universal Storage
Platform subsystem
SANRISE Network Storage
Controller subsystem
SANRISE9900V series subsystem
SANRISE H12000 subsystem
SANRISE H10000 subsystem
SANRISE H1024/H128 subsystem
DF600F-CM TagmaStore™ Adaptable Modular
Storage subsystem
TagmaStore™ Workgroup Modular
Storage subsystem
Thunder 9500V series subsystem
SANRISE Adaptable Modular
Storage subsystem
SANRISE Workgroup Modular
Storage subsystem
SANRISE9500V series subsystem
• If you access a remote command device from an OPEN host, the remote command device reports
device information about the command device, which is mapped as a remote command device
of the external array.
Device information about the command device that the remote command device reports to the
host includes:
• Serial number
• Vendor
• Device name
External Storage XP user guide for the XP12000, XP10000, SVS200 147