HP XP External Storage Software - Manual (Page 157)

Corrective action Error
Corrective action: The
external array's port is
recognized. Check the
external array's setting
and status. If you cannot
restore the path, contact
your HP account support
representative.
Status: The external array
(for example, XP) port
attribute changed to
Initiator. Initiator port
Corrective action: Set the
external array's port
attribute back to target. If
you cannot restore the
path, contact your
HP account support
representative.
Status: The port attribute
of the external array
changed to RCU target. RCU target port
Corrective action: Set the
port attribute of the
external array to Target.
If you cannot restore the
path, contact your
HP account support
representative.
Status: The external
array's port attribute is
unknown. Unknown port
Corrective action: The
external array's port is
recognized. Check the
condition of the
connection (for example,
cables and switches) to
the external array. If you
cannot restore the path,
contact your HP account
support representative.
Status: The path was
removed or the external Cannot detect port
array's port cannot be
found. There is a problem
with the connection to the
external array. The
following are possible
causes:
• The fibre cable is not
connected properly.
External Storage XP user guide for the XP12000, XP10000, SVS200 157