HP XP External Storage Software - Manual (Page 120)

1. Select the LU Operation tab. The LU Operation pane appears.
2. In the Device tree, select the external LU group number. Information about the external LU mapped
as an internal LDEV appears in the Device list.
3. In the Device list, right-click the external LU you want to restore, and select LDEV Information. The
LDEV Information window appears. The LDEV list displays information about the external LU
selected in the Device list on the LU Operation pane.
4. Select View all LUs.
5. In the LDEV list, right-click the row of the external LU to be restored, and select Restore.
Figure 57 Shortcut menu of the LDEV Information window
The Status column in the selected external LU row changes to Restore.
6. Click OK. The LDEV Information window closes, and the LU Operation pane appears.
Specified contents appear in blue italics in the Device list and appear in the Preset list. To check
setting details, right-click the setting in the Preset list, and select Detail. To cancel settings, right-click
the setting in the Preset list, and select Delete.
7. Click Apply. A confirmation message appears.
8. Click OK.
The status of the external LU set in the LDEV Information window changes to Restore (restored),
and the external LU can be used in Command View XP or XP Remote Web Console.
If errors occur when changing the external LU's status, failed settings and error codes appear in
the Preset list. To check error messages, right-click the failed setting, and select Detail.
Displaying configuration information for external LUs (Volume Detail)
To display the Volume Detail window, right-click a row with an external LU from the LDEV list in the
LDEV Information window, and select Volume Detail (
Figure 57 ). If you select an external LU that is
a LUSE volume in the LDEV list, the Volume Detail window displays a list of all LDEVs that make up
the LUSE volume.
Configuring external LUs 120