Delete paths window – HP XP External Storage Software User Manual
Page 116
Figure 55 Delete Paths window
•
Port
Local array ports. After selecting a port, you can add the paths. One of the following icons appears
for each port:
Description
Icon
Port in Standard mode.
Port in Initiator/External MIX mode.
•
Selected Paths
Paths of WWNs to be deleted. WWNs identify ports on the external array. Nothing is displayed
when you first access the Delete Paths window.
•
Unselected Paths
Ports (WWNs) on the external array that have paths configured for connecting with the local array
port selected in the Port list. Select WWNs from this list to delete paths.
•
Set
Moves WWNs selected in Unselected Paths to Selected Paths.
•
Release
Moves WWNs selected in Selected Paths to Unselected Paths.
•
OK
Saves settings in the Delete Paths window, closes the Delete Paths window, and displays the Path
Setting window.
•
Cancel
Cancels all of the settings in the Delete Paths window, and closes the window.
To delete paths for multiple volumes at one time:
1.
Select the LU Operation tab. The LU Operation pane appears.
2.
In the Device tree, select an external LU group number. Information about external LUs mapped
as internal LDEVs appears in the Device list.
3.
In the Device list, select multiple external LUs, right-click, and select Delete Paths. The Delete Paths
window (
) appears.
Configuring external LUs
116