HP XP External Storage Software - Manual (Page 92)

Displays the SSID window, where you can continue with the next step of the mapping operation.
If the SSID setting is not necessary, the Add LU window closes, and the LU Operation pane appears.
The OK button is available when mapping on the Add LU window is complete.
• Cancel button
Cancels all mapping operations, closes the Add LU window, and returns to the LU Operation
pane.
Select Paths pane
All paths that can be set as primary and alternate paths appear in the Select Paths pane. To set a
specific path as the alternate path, use the Select Paths pane to specify candidates for the alternate
paths.
If you let alternate paths be automatically set with all connected normal paths as candidates, you can
omit the setting operation on the Select Paths pane.
Figure 43 Select Paths pane
• Port
Local array ports. You can set alternate paths for the selected port. One of the following icons
appears for each port:
Description Icon
Port in Standard mode.
Port in Initiator/External MIX mode.
• Selected Paths
External array port for which you can set the alternate path connecting to the local array port
selected in the Port list. By default, all ports that can be set as alternate paths appear. The WWN
identifying the external array port appears. If the primary path and as many alternate paths as
you set in Alternate Path in the Add LU pane cannot be set with the paths selected in Selected
Paths, an error occurs and appears in the Preset list.
• Unselected Paths
Configuring external LUs 92