HP Officejet 350 All-in-One Printer - Manual (Page 156)

MENU:
Fax/Copy
Contrast

Adjusting the Contrast
The Fax/Copy Contrast setting affects the lightness and darkness of
your outgoing faxes and copies as they are scanned. Change the
Contrast setting before copying. Either use the HP OfficeJet Manager
(
OfficeJet Setup/Scanned Image Quality dialog box) described in
chapter 1 or the front panel instructions described here.
Refer to the following when changing the lightness or darkness of
copies. (Do not adjust the
Resolution setting; copies are always made
with the best resolution.)
N
Darken for originals that are too light.
N
Normal for documents with acceptable lightness/darkness
(factory setting).
N
Lighten for originals that are too dark.
Do this:
Using
these buttons:
For this display:
1. Press the Menu button to
display the menu. "Time/
Date, Header" is displayed.
Menu
MENU
Time/Date, Header
2. Press Right Arrow multiple
times to move to "Fax/Copy
Contrast."
MENU
Fax/Copy Contrast
3. Press Enter/Save to select
"Fax/Copy Contrast." Note
that the current setting is
marked with an asterisk (*).
Enter/Save
FAX/COPY CONTRAST
Normal *
4. Press Right Arrow until the
contrast setting you want is
displayed. ("Darken" is
shown as an example.)
FAX/COPY CONTRAST
Darken
5. Press Enter/Save to select the
displayed setting. An asterisk
denotes your new selection.
Enter/Save
FAX/COPY CONTRAST
Darken *
6. Press Enter/Save to return to
the Ready display.
Enter/Save
Ready Auto
Apr-23-96 10:30 AM