HP Officejet 350 All-in-One Printer - Manual (Page 37)


Reducing Copies of Originals
To make reduced copies of originals, select OfficeJet Setup/Copy
Reduction and slide the mouse down the list of percentages displayed
in the drop-down menu. Release the mouse button after your
selection has be highlighted.
Setting DOS Printing Options
To set printing options for DOS software applications, choose
OfficeJet Setup/Printing Options (DOS) . These selections update the
HP OfficeJet DOS printing characteristics and any DOS application
that prints afterward will use these settings unless the application's
printer driver overrides them.
Your DOS software application supplies printer drivers for many
printer models. A printer driver that supports your printer features
may already be in your software application. Your access to some
printer features, such as font selection, depends on your software
application and the printer driver installed.
Note:`If you use DOS software applications and Windows
applications, be sure to exit Windows before running your DOS
applications. Do not print from the Windows MS DOS Prompt.
The following table summarizes the choices you can make from the
HP OfficeJet Manager for DOS printing.
Font The character set the printer uses for printing.
Font Size Normal or Condensed.
Print Quality Letter (highest) or Draft (quickest).
Carriage Return Carriage Return (CR) only or Carriage Return and
Line Feed (CR and LF).
Orientation Portrait or Landscape.