HP Officejet 350 All-in-One Printer - Manual (Page 25)


Applies To... Use Whenever You Need To... Setting
Receive Fax Setup
: Change the Receive Mode to indicate whether
you want the HP OfficeJet to automatically
answer all phone calls or whether you want to
manually answer the phone.
Paper and PC faxes.
: Change the number of rings before the HP
OfficeJet answers (only applicable when receive
mode is set to Auto). The factory setting is Rings
to Answer=2.
Paper and PC faxes.
: Reduce page size of incoming faxes to match
paper size loaded in tray. The factory setting is
Automatic Reduction=On.
Paper faxes.
: If an error occurs, specify that incoming faxes be
received to memory. The factory setting is
Backup Reception=On.
Paper faxes.
: Specify a distinctive ringing service. The factory
setting is Distinctive Ring=Off.
Paper and PC faxes.
: Receive faxes from older-model fax machines
that don't emit a fax signal. The factory setting is
Silent Detect=Off.
Paper and PC faxes.
: Allow remote dial-in. The factory setting is
Remote Service=Off.
Loaded Paper Size Specify type of paper currently loaded: Letter,
Legal, A4, Exec, or Envelope. Change this setting to
match the size of paper. The factory setting for the
U.S. is Loaded Paper Size=Letter. Paper faxes.
Copy Reduction Specify the percentage of copy to be reduced,
relative to the original. The factory setting is Copy
Reduction=100%. Paper faxes.
Printing Options
(DOS) Setup the HP OfficeJet as a printer for a DOS
application. DOS applications.
Sounds Turn off or adjust the volume of sounds device
makes. The factory settings are Ringer=On,
Beeps=On, Ring and Beep Volume=Soft. Paper and PC faxes.