HP StorageWorks XP Remote Web Console Software - Manual (Page 104)

Figure 41 CT Group Status Dialog Box
•
CT Group: Group number of the selected consistency group.
•
This CU Type: CU type (MCU or RCU) of the selected consistency group.
•
LDKC: The number of the LDKC where the consistency group belongs.
•
CLPR: The number and name of the CLPR to that the volumes forming pairs belong.
•
S/N, ID: Serial number and SSID of the CUs or Path Gr. of the selected consistency group.
The LDKC number is also displayed enclosed in parentheses to the right of the CU number.
•
Port,GID,LUN: Pairs in the connected CU that are in the selected consistency group. The GID
column shows the host group name in parentheses.
GID, which is indicated in hexadecimal two-digit number, is automatically allocated when
you create the host groups by using LUN Manager.
•
LUN columns shows the CU:LDEV in parentheses. For LUs with more than one path, only the
first path is listed.
The path is connected to the first port within the ports configured to a path that is shown in
the tree view of the Pair Operation Window.
If the pound or gate symbol (#) is added to the end of an LDEV number (for example, 00:3C
#), the LDEV is an external volume. For details on external volumes, see the HP
XP24000/XP20000 External Storage Software User's Guide.
•
MCU-RCU Path: Type of channel interface between the storage systems (fibre).
•
Offloading Timer (sec.): The amount of time necessary for monitoring the transfer of data to a
sidefile. If the CU type is RCU, this parameter is not displayed.
•
Inflow Control: Enable or disable the inflow control. If the CU type is RCU, this parameter is
not displayed.
•
Time Out (Copy Pending) (min.): Maximum delay allowed for an XP Continuous Access
Asynchronous copy (see
“Changing the Consistency Group Options” (page 102) ).
•
Time Out (RCU Ready) (min.): Maximum delay allowed for re-establishing MCU-RCU
communications following an MCU power-off (see
“Changing the Consistency Group Options”
(page 102) ). If the CU type is RCU, this parameter is not displayed.
The Previous button displays status information for the consistency group number before the current
consistency group. The Next button displays status information for the CT group after the current
104 Performing XP Continuous Access Configuration Operations