Splitting xp continuous access pairs – HP StorageWorks XP Remote Web Console Software User Manual
Page 130
•
Check box, Refresh the Pair Operation window after this dialog box is closed: To refresh the
Pair Operation window after closing the Detailed Information dialog box, click the check box.
By default, the check box is not selected.
•
The Previous button displays the pair status information for the previous pair in the list (the
pair in the row above). The Next button displays the pair status information for the next pair
in the list (the pair in the row below). The Refresh button updates the pair status information.
The Close button closes the Detailed Information dialog box.
The Display Filter settings can affect how Previous or Next is recognized.
The list displays a maximum of 4,096 rows at once. The Previous and Next buttons on the Detailed
Information dialog box can only be used for the currently displayed 4,096 rows.
Splitting XP Continuous Access Pairs
The Pairsplit-r dialog box (see
) allows you to split existing XP Continuous
Access pairs and select the pairsplit options for the pair(s). To open the Pairsplit-r dialog box, click
the Pair Operation tab, select a CU grouping, CU, port, or host group from the tree, select the
desired pair, right-click, and then click the Pairsplit-r command.
You can split an XP Continuous Access pair only after the initial copy operation is complete.
130 Performing XP Continuous Access Pair Operations