HP StorageWorks XP Remote Web Console Software - Manual (Page 165)

Table 38 Error Code and Error Contents When Operating RAID Manager (continued)
Error Content Error Code
(SSB2)
Error Code
(SSB1)
Paircreate cannot be executed because the LUN for P-VOL is the LUSE which is
created across the multiple CLPRs. CBD0
Paircreate cannot be executed because the LUN for S-VOL is the LUSE which is
created across the multiple CLPRs. CBD1
A copy pair cannot be created because the specified P-VOL is not the P-VOL for XP
Continuous Access Journal. CBD8
Paircreate cannot be executed because the used capacity for Data Retention Utility
program product on the RCU exceeds the licence capacity. CBDA
A request for XP Continuous Access Paircreate was received in the XP Continuous
Access-XP Continuous Access Journal combination status. However, the command
was rejected because the Mirror ID for XP Continuous Access Journal was 0. CBDC
In configuring the XP Continuous Access-XP Continuous Access Journal multi-target,
a request for an XP Continuous Access Paircreate was received. However, the CBDD
command was rejected because the XP Continuous Access Journal pair was in
process of copying.
Paircreate cannot be executed because the P-VOL is used by XP Snapshot. CBDE
Paircreate cannot be executed because the S-VOL is used by XP Snapshot. CBDF
Paircreate cannot be executed because the P-VOL is a virtual volume for XP Snapshot. CBE0
Paircreate cannot be executed because the S-VOL is a virtual volume for XP Snapshot. CBE1
Paircreate cannot be executed because the P-VOL is a Pool-VOL for XP Thin
Provisioning. CBE2
Paircreate cannot be executed because the S-VOL is a Pool-VOL for XP Thin
Provisioning. CBE3
More than 16,384 pairs cannot be created in one storage system. CBE7
A request for XP Continuous Access Paircreate was received. However, the command
was rejected because the specified S-VOL was the S-VOL or the journal volume for
XP Continuous Access Journal. CBED
A request of TrueCopy Paircreate was received. However, the command was rejected
because the specified P-VOL was already created as a Universal Replicator pair for CBEE
differential resync, or as a pair for primary site in 3DC multi target configuration
on the three Universal Replicator sites.
Pair cannot be created because the XP Continuous Access Asynchronous program
product is not installed. B992 B901
The consistency group information cannot be retrieved, because one of the following
program products is not installed: XP Continuous Access, XP Continuous Access
Asynchronous, or XP Continuous Access Journal. B992 B90A
SIM Report
The storage system generates a Service Information Message (SIM) when it is necessary to notify
the user of a possible service requirement for the storage system. SIMs can be generated by the
channel and storage path microprocessors of the storage system and by the service processor
(SVP) of the storage system. The SVP reports all SIMs related to XP Continuous Access operations.
Each time a SIM is generated, the amber Message LED on the storage system control panel (under
the Ready and Alarm LEDs) turns on as an additional alert for the user.
The SIMs are classified according to severity for reporting and logging purposes: service, moderate,
serious, or acute. All SIMs are recorded on the storage system SVP and displayed on the Remote
SIM Report 165