HP XP Continuous Access Software User Manual
Page 192
Information window (see
“Displaying Detailed Information about a Pair of Data Volumes”
) to monitor the detailed status of each pair.
Figure 84 Pairresync Window
The Pairresync window shows the following:
•
Range: Specify the restore range. The default is LU if two or more pairs in the same consistency
group are selected; the default is Group if not. The default setting is Group when the pair
status is HOLD, HOLDING, or HLDE, and in that case, you cannot change the default setting.
◦
LU: Only the specified pairs are restored.
◦
Group: All pairs in the same consistency group(s) as the selected pair(s) are restored.
If the following two conditions are satisfied and you click Apply, a warning message is
displayed and processing cannot be continued.
◦
The Preview list contains two or more pairs belonging to the same consistency group.
◦
The Range column shows Group for at least one of the above pairs.
To continue processing, do one of the following:
◦
Ensure that the Range column shows LU for all pairs in the same consistency group.
◦
In the Preview list, select all but one pair in the same consistency group, right-click the
selected pairs, and then select Delete.
•
Priority: Specify the desired priority (1-256) (scheduling order) for the pair-restoring operations.
If Range is Group, you cannot change the Priority option.
•
DKC: Shows the following information for a remote storage system:
The serial number with the LDKC number
◦
◦
The controller ID with the model name
◦
The path type
192 Performing XP Continuous Access Journal Pair Operations