HP XP Continuous Access Software - Manual (Page 223)

Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents Error Code
(SSB2)
Error Code
(SSB1)
The XP Continuous Access Journal pair cannot be created because the
specified P-VOL was being shredded. 3708
A request of XP Continuous Access Journal Paircreate (journal suspend
mode) or XP Continuous Access Journal Pairresync (journal resync mode) 3709
was received. However, the command was rejected because the specifying
of the restore journal group was incorrect.
The XP Continuous Access Journal pair cannot be resynchronized
(DELTAJNL parameter specifying) because the specified P-VOL is not in 370B
HOLD or HOLDTRNS status. Or, the XP Continuous Access Journal pair
cannot be resynchronized (ALLJNL parameter specifying) because the
specified P-VOL is not in HOLD, HOLDTRANS, or NODELTA status.
A request of XP Continuous Access Journal Paircreate (journal suspend
mode) or XP Continuous Access Journal Pairresync (journal resync mode) 370C
was received. However, the command was rejected because the status
of the specified master journal group or restore journal group could not
be transferred, or the status transition was in progress.
A request for XP Continuous Access Journal Paircreate or XP Continuous
Access Pairresync was received. However, the command was rejected 371C
because the XP Continuous Access pair was in a status other than
suspending or was not used by XP Continuous Access in the 2DC
configuration which consists of XP Continuous Access Journal and XP
Continuous Access.
3DC multi-target configuration cannot be created because the system
option mode 707 was set to ON. 371D
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because the journal volume
of the specified master journal group was blocked. 3720
The pair cannot be created because the version of the DKCMAIN micro
program on the remote storage system does not support the LUSE volume. 3723
The XP Continuous Access Journal pair cannot be created because the
volume specified as the P-VOL was the system disk. 3726
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because it was connected with the
old model and the specified volume was unsupported. 3728
A request of XP Continuous Access Journal Paircreate was received.
However, the pair could not share the volume with XP Continuous Access 3729
because the Disaster Recovery Extended program product was not installed
in the primary storage system.
A pair cannot be created because the secondary storage system does not
support the combination of multiple primary and secondary storage
systems. 372B
The volume is inaccessible because the primary volume is blocked. 372C
The specified volume is used in the system that consists of multiple primary
and secondary storage systems. Therefore the command was rejected
because the delta resync operation cannot be executed. 372D
A request to create or resynchronize a pair in the system that consists of
multiple primary and secondary storage systems was received. However, 372E
the command was rejected because the Disaster Recovery Extended
program product was not installed in the primary storage system.
Troubleshooting When Using RAID Manager 223