HP XP Continuous Access Software User Manual
Page 95
Figure 43 Transferring Business Tasks from the XP Continuous Access Secondary Site to the Primary
Site (in a 3DC Multi-target Configuration)
Transferring Business Tasks from XP Continuous Access Secondary Site to Primary Site (When Delta
Resync Operation is Performed in 3DC Multi-target Configuration)
To transfer your business tasks back to the primary site, follow the described in this section. RAID
Manager is used in this procedure:
1.
If the XP Continuous Access Synchronous pair is suspended, use RAID Manager to resynchronize
the pair and reverse the primary and secondary volume.
2.
Stop business tasks at the XP Continuous Access Synchronous secondary site.
3.
Use RAID Manager to execute the horctakeover command on the XP Continuous Access
Synchronous pair.
4.
Use the primary volume at the primary site to resume your business tasks.
5.
When you perform delta resync operation on the volume in XP Continuous Access Synchronous
primary site, the status of the data volumes of the XP Continuous Access Journal pair changes
as explained in
.
Interoperability with Other Products and Functions
95