HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 135)

= view, completion time = yyyy/mm/dd hh:mm:ss
#
Nothing is displayed for Support Cluster even if you are using cluster
software. However, the cluster-support functions are, in fact, operating
without problem.
22
.
By checking the execution results of the view operation, verify the
version of the installed HDLM.
If HDLM Version is x.x.x-xx, the installed version of HDLM is correct.
The installed version of HDLM is shown for x.x.x-xx.
23
.
By checking the execution results of the view operation, verify that the
programs are running normally.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive,
the programs are running normally.
24
.
If you are using VxVM, execute the following command to confirm that
the DEVICE column of the LUs managed by HDLM is displayed in the
cWtXdYsZ format (for example, c6t0d10s2):
# vxdisk list
If the value is displayed in the cWtXdYsZ format, perform the following
procedures:
¢
Delete the /etc/vx/disk.info file.
¢
Restart the host, or restart the VxVM configuration daemon by
executing the following command:
# vxconfigd -k
25
.
If you removed HDLM 04-00 or HDLM 04-01 and then newly install HDLM,
create a table that shows the correspondence between the HDLM logical
device file names before and after installation of HDLM.
Specify the file (the file you created before you removed HDLM 04-00 or
HDLM 04-01) in which you saved the output results of the dlnkmgr
command's view -path operation, as the input file for the dlmlisthdev
utility for assisting HDLM transitions. The following shows an example of
executing the dlmlisthdev utility when upgrading from HDLM 04-00:
The following table shows and describes the items to be displayed.
Creating an HDLM Environment
3-69
Hitachi Dynamic Link Manager (for Solaris) User Guide