HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 388)

Parameter
and program
information
to be
displayed
Item Description
For example, when there are 100 days left until
the license period (2006/08/21) expires, the
following appears:
2006/08/21(100days after)
-audlog
Information
about audit log
data collection
settings
Audit Log Settings for audit log data collection:
•
Whether collection is enabled:
on: Enabled
off: Disabled
• Audit log data collection level:
When audit log data collection is on, the
collection level that has been set is displayed
within the parentheses following on. The
collection level indicates a severity level. A value
from 0 to 7 is displayed as the collection value.
Audit Log
Category The categories of audit log data to be output are
displayed. When more than one category is displayed,
commas (,) are used as separators.
ss: StartStop
a: Authentication
ca: ConfigurationAccess
If all the above categories are specified, all is
displayed.
If the collection of audit log data is disabled, a hyphen
(-) is displayed.
Audit Log
Facility The name of the audit log facility is displayed. user,
local0, local1, local2, local3, local4, local5,
local6, or local7 is displayed.
If the collection of audit log data is disabled, a hyphen
(-) is displayed.
-
lbpathusetim
es
The number of
times the
same path can
be used for
load balancing
Times Same
Path Was Used The number of times the same path can be used for
I/O operations when the Round Robin (rr), Least I/Os
(lio), or Least Blocks (lbk) algorithm is used for load
balancing.
If you used Global Link Manager to set the number of
times the same path can be used in units of LUs, an
asterisk (*) is added after the value.
-
expathusetim
es
The number of
times the
same path can
be used for
Times Same
ExPath Was
Used The number of times the same path can be used for
sequential I/O operations when the extended Round
Robin (exrr), Least I/Os (exlio), or Least Blocks
(exlbk) algorithm is used for load balancing.
6-40
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide