HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 250)

d: The total number of all HDLM devices
#1
If the number of paths differs depending on an HDLM device, use the
maximum number for the calculation.
#2
The I/O timeout value used for sending a notification to the sd or ssd
driver depends on the timeout settings for switches or HBAs.
Removing HDLM
This section explains how to return the HDLM environment to the way it was
before HDLM was installed, and describes each step of the process.
Overview of HDLM Removal
Use the general procedure shown in the following figure to return to the
environment before HDLM was used.
Figure 3-31 Overview of HDLM removal
#
Perform as required.
3-184
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide