HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 260)

A virtual disk backend is a location where virtual disk data is stored. A
disk, disk slice, file, or volume (such as ZFS, SVM, and VxVM) can be
used for the backend.
In the control domain, register the install_disk file on a built-in disk as a
virtual disk backend. The I/O domain recognizes this disk as a virtual disk.
The device name of this virtual disk is /dev/[r]dsk/c0d0. In the I/O domain,
register an HDLM device used in the storage system as a virtual disk
backend. The guest domain recognizes this disk as a virtual disk.
In this configuration example, /dev/dsk/c4t50060E8010027A82d0s2
and /dev/dsk/c4t50060E8010027A82d1s2 are HDLM devices.
The following table shows an LDoms domain setting example.
Table 3-36 LDoms Setting Example
Domain
Name
Domain
Type
Boot Disk Exporting Virtual Disk Backends
primary A control
domain
(including
I/O domains
and service
domains)
An internal disk vol1: /install_disk
(For a local boot disk of the I/O
domain)
ldg1 An I/O
domain
(including
service
domains)
vol1@primary-vds0 vol1: /dev/dsk/
c4t50060E8010027A82d0s2
(For a local boot disk of the guest
domain)
vol2: /dev/dsk/
c4t50060E8010027A82d1s2
(For a data disk of the guest
domain)
ldg2 A guest
domain
vol1@ldg1-vds0 --
The following figure shows a configuration example for an LDoms
environment before removing HDLM.
3-194
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide