HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 427)

dlnkmgr monitor -hbaid HBA_ID [-intvl Interval-Time]
[-count Number-Of-
Times] [-t]
dlnkmgr monitor { -cha -pathid AutoPATH_ID | -chaid
CHA_ID }
[-intvl Interval-Time] [-count Number-Of-
Times] [-t]
Valid value
HBA_ID { 000000 - 99999 }(Decimal)
CHA_ID { 00000 - 99999 }(Decimal)
Interval-Time { 1 - 60 }(Seconds) (Default
Value 3)
Number-Of-Times { 1 - 999 }(Times) (Default
Value 10)
KAPL01001-I The HDLM command completed normally. Operation
name = monitor, completion time = yyyy/mm/dd hh:mm:ss
#
add (Adds a Path Dynamically)
The dlnkmgr command's add operation batch-adds paths that are connected
to the host and not configured on the host. You can execute this command
dynamically without any effects on existing paths.
Format
To Add a Path Dynamically
/opt/DynamicLinkManager/bin/dlnkmgr add -path [-s]
To Display the Format of the add Operation
/opt/DynamicLinkManager/bin/dlnkmgr add -help
Parameters
To Add a Path Dynamically
-path
Indicates that the target of the operation is a path managed by HDLM.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr add -path
KAPL01161-I This operation will change the path configuration.
Do you want to continue? [y/n]:y
KAPL01162-I A path was added. (path ID = 00010, storage =
HITACHI.HUS100.9100163, iLU = 0030)
:
KAPL01159-I Paths were added. (number of paths added = 2,
completion time = yyyy/mm/dd hh:mm:ss)
Command Reference
6-79
Hitachi Dynamic Link Manager (for Solaris) User Guide