HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 518)

Message
ID
Message Text Explanation
not started or contains an error,
execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL05011
-E
Could not attach the HDLM driver
(filter component) to Disk (aa...aa),
Partition (bb...bb). (cc...cc:dd...dd)
Execute the DLMgetras utility to
collect error information, and then
contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to
execute the DLMgetras utility.
Details
An attempt to register the path
for the disk and partition into the
core logic has failed.
aa...aa: Minor number of the sd
or ssd device (decimal number)
bb...bb: Slice number (decimal
number)
cc...cc: Error code (hexadecimal
number)
dd...dd: Address of table for
managing the HDLM filter driver
(hexadecimal number)
Action
Check whether the HDLM driver
has started normally. If it has
not started or contains an error,
contact your HDLM vendor or the
maintenance company, if there
is a maintenance contract for
HDLM, and report the error and
detail code.
KAPL05014
-I
The device object (aa...aa) was
registered as the path (bb...bb).
Details
The HDLM filter driver was
successfully attached and
registered as a path.
aa...aa: Address of table for
managing the HDLM filter driver
(hexadecimal number)
bb...bb: Path ID (hexadecimal
number)
Action
None.
KAPL05018
-W
The FO processing in the path
(aa...aa) failed. (bb...bb:cc...cc)
Check the connection status of the
path aa...aa. If there is no problem
with the connection status, execute
Details
aa...aa: Core logic path identifier
for the failed FO (hexadecimal
number)
8-42
Messages
Hitachi Dynamic Link Manager (for Solaris) User Guide