HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 273)

3
.
Execute the following command to set the HDLM logical device file name
in the HDLM filter driver:
# /opt/DynamicLinkManager/bin/dlmsetdevname
4
.
Execute the following command to start the HDLM manager:
# /etc/init.d/DLMManager start
Tasks that Can Be Performed in Single-User Mode
By executing the procedure described in Initializing HDLM When the Host Is
Started in Single-User Mode on page 4-4 , you can perform the following tasks
in single-user mode while applications are inactive.
For Solaris
You can perform the following tasks on the server on which HDLM is
installed, in the same manner as on a server without HDLM installed:
¢
Apply patches
¢
Add or delete packages
¢
Change basic settings in Solaris, etc.
For HDLM
¢
Installing HDLM
¢
Configuring a boot disk environment
¢
Setting up HDLM functions
¢
Setting up an integrated trace #
¢
Creating a file system
¢
Executing an HDLM command
¢
Using an HDLM device
¢
Changing the configuration of the HDLM operating environment
¢
Applying an HDLM service pack
#
In single-user mode, HDLM command activity is not logged to
integrated trace files.
For applications
¢
Install an application
¢
Upgrade an application
¢
Set or change the configuration
HDLM Operation
4-5
Hitachi Dynamic Link Manager (for Solaris) User Guide