HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 319)

Figure 4-6 The /opt/DynamicLinkManager/config/dlmfdrv.unconf
file (before editing)
Figure 4-7 The /opt/DynamicLinkManager/config/dlmfdrv.unconf
file(after editing)
The shaded portion indicate the text to be edited.
Note
Do not edit anything other than adding the hash mark (#) to the
beginning of the LDEV property line.
3
.
Apply the contents that were edited in step 2 to the HDLM driver
configuration definition file (/kernel/drv/dlmfdrv.conf).
Execute following the dlmsetconf utility to apply the settings in the HDLM
driver unconfiguration definition file (/opt/DynamicLinkManager/config/
dlmfdrv.unconf) to the HDLM driver configuration definition file (/
kernel/drv/dlmfdrv.conf):
# /opt/DynamicLinkManager/bin/dlmsetconf -u
4
.
Execute the dlmcfgmgr utility for managing the HDLM configuration, or
restart the host, with the reconfiguration option specified.
The following shows an example of executing the command:
¢
When executing the dlmcfgmgr utility:
# /opt/DynamicLinkManager/bin/dlmcfgmgr -a
¢
When restarting the host, with the reconfiguration option specified:
# reboot -- -r
HDLM Operation
4-51
Hitachi Dynamic Link Manager (for Solaris) User Guide