HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 575)

Message
ID
Message Text Explanation
Processing will stop because an
incorrect value was entered three
or more times for the message
confirming the execution of the
dlmsetconf utility for creating the
HDLM driver configuration
definition file.
Action
When executing the utility, enter
the correct value.
KAPL10256
-I
The user terminated the operation. Details
The user has interrupted
processing.
Action
None.
KAPL10257
-W
The output file (aa...aa) could not
be opened. Errno = bb...bb
(cc...cc)
Details
An attempt to open the output file
has failed.
aa...aa: Output file name
bb...bb: Errno (decimal number)
cc...cc: Errno string
Action
Take countermeasures according
to the Errno.
KAPL10258
-W
The ioctl(aa...aa) operation has
failed. Errno = bb...bb (cc...cc),
Device = dd...dd
Details
An attempt to issue an IOCTL call
has failed.
This message is also output for
paths of the LUs that were
dynamically deleted.
aa...aa: IOCTL code (hexadecimal
number)
bb...bb: errno (decimal number)
cc...cc: errno string
dd...dd: Logical device file name
for the sd or ssd driver from
which information is to be
collected
Action
If the disk indicated in Device is
the LU that was dynamically
deleted, no action is required. To
prevent this message from being
output, restart the host. If the
disk indicated in Device is the LU
that was not dynamically deleted,
make sure that the disk is
Messages
8-99
Hitachi Dynamic Link Manager (for Solaris) User Guide