HP NonStop G-Series - Manual (Page 135)

L700 (CTL700) Installation and User’s Guide — 527338-004
C- 1
C
Requirements for the CT9841FC-1
For OSM support of the CT9841FC-1 tape drives, you need:
•
G06.23 or later versions of OSM are required.
•
CT9841FC-1 is supported on G06.16 through G06.22 by installing the G06.23 or
later version of OSM, and the appropriate SPR’s. See prerequisites SPR’s for OSM
in the “OSM Migration Guide” for G06.23 or later.
For CTL700 support of the CT9841FC-1 tape drive follow the instructions below:
The HP NonStop S-series server supports only FC-AL mode. Please configure the
tape drive from the library control panel to the following settings:
•
HARD ADDRESS "ENABLED"
•
LOOP ID "005"
No other changes need to be made to the tape drive and/or the tape library.
For SF10v2 (Silo Media Manager) support of the CT9841FC-1 tape drive the following
versions are needed:
•
SF10v2 version is 6.05
•
GUI version 6.0.1.22